Security camera pole, as the name suggests, is a fixed security camera pole, according to the use of points, there are three main categories, respectively, road violations capture security camera poles, residential community security camera poles, and petrochemical industry field security camera pole
Security camera pole, as the name suggests, is a fixed security camera pole, according to the use of points, there are three main categories, respectively, road violations capture security camera poles, residential community security camera poles, and petrochemical industry field security camera pole, although the name of these three types of poles are the same, but the use of the purpose and specifications of the material, there are still differences in the following we come to one by one comparison.
Road violation capture security camera pole: this type of security camera pole is mainly installed in towns, counties, urban areas and highways on both sides of the road, its purpose is to detect, supervise motor vehicle violations, this type of pole height is usually more than 6.5 meters (to avoid larger trucks due to super-high, and scrape the cross arm of the security camera pole), the length of the cross arm according to the width of the road surface to decide, such as four lanes of highway, by 3 meters per lane, the width of a total of 12 meters, then the cross arm length of the security camera pole needs to be about 12 meters, the purpose is to correspond to the location of each lane above, can match a surveillance camera, due to the length of the cross arm of the road security camera pole, and the width of the road is closely linked to the wider the road, the longer the length of the cross arm, affected by the principle of leverage, the diameter of its rod and wall thickness needs to be calculated accurately! Because the cross arm is too long, it will inevitably produce a larger leverage force on the pole, if the pole is too thin, or thickness is not enough, it can easily lead to pole fracture, resulting in serious consequences, so this type of security camera pole, whether it is the cross arm or pole, need to strictly follow the design specifications of the design institute to produce production, the material is mainly low carbon steel-based.
Residential community security camera pole: this type of security camera pole size is usually smaller, with a height between 3 - 4 meters, its role is to protect the community security and stability, such as theft, robbery, and other violations, the public security department can be accessed through the district's surveillance images, quickly lock the suspects, due to the security camera pole of this type of Low height, and no cross-arm, so the diameter and wall thickness of the pole uprights do not need to be too large, the material is also mostly carbon steel-based, there are some communities to improve the aesthetics, the use of lower-cost 210 stainless steel as the main raw material for security camera poles.
Petrochemical field security camera pole: this special area of the security camera pole, often need to have a special detection function, in order to petrochemical areas, for example, in addition to detecting violations, but also need to have the safety of the equipment in the field to collect, analyze, alarm and other functions, that is to say, the security camera pole needs to be loaded on the top of the security camera at the same time, but also need to be equipped with, such as “Laser head methane gas detection equipment” when the pipeline valve methane gas leakage, security camera pole on the detection equipment will analyze the concentration, and then with the alarm issued by the alarm, timely warning staff to carry out maintenance to minimize the potential safety hazards, due to this type of area is often close to the seaside, or acid and alkali and other chemical Environment, so the security camera pole material requirements, it is relatively high, conventional carbon steel material is difficult to meet the requirements of the longest material is usually 304 stainless steel and 316L stainless steel-based, due to the special environment, the field area usually exists in flammable and explosive facilities, so the requirements of the field equipment is also usually higher, such as security camera poles, the wall thickness of a minimum of not less than 4 ㎜, must protect the safety and not to any safety accidents.
Different venues, different needs, the need to use different materials and specifications of the security camera pole, which also derives from a variety of different types of security camera pole products, but no matter how many types, the purpose is only one, that is, how to be able to play more fully the camera's shooting perspective, if more convenient to maintain the load equipment, as well as a longer service life.